Air Conditioner and Heater Plumbing for 2002 Chrysler Voyager
3/8. 3/4 inch, Red. Evaporator Side 10mm. 1/2 Evaporator to H-Valve. Up to 02/29/12. 1/2 Expansion Valve to Evaporator. Liquid. Valve to Evaperator. 10.25MM ID.
[15.5mm]. [15mm]. 15.51mm ID 2.63mm Thick. 15.51mm ID 2.63 thick. 3/4 Evaporator to H-Valve. 3/4 Expansion Valve to Evaporator. Suction. Valve to Evaperator. 15.54MM ID.
Expansion Valve. Evaporator Line Alignment Plate. Evaporator Line Alignment Tool.
Suction Line to Expansion Valve. Suction Line to H-Valve. 5/8 inch. 5/8 Burgandy.
A/c Line O Ring
Suction Line to Expansion Valve. Suction Line to H-Valve. 5/8 inch. 5/8 Burgandy. Condenser End. Accumulator End. At Accumulator.
Valve core. Accumulator. After 12-01-03, After 12-12-03. Standard.
Liquid Line to Drier & Condensor. Contains 5103428AA- Gasket and 5102355AA - O-Ring. Discharge. To Compressor and Condenser.
Air Conditioning Transducer
Liquid Line. Includes: O-Ring. Up To 06/28/2010. Discharge Line. Includes Item # 4.
A/c Line O Ring
Liquid Line to Drier. Expansion Valve. 1/2 inch. Compressor And Condenser End.
NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
[15.5mm]. [15mm]. 15.51mm ID 2.63mm Thick. 15.51mm ID 2.63 thick. 3/4 Evaporator to H-Valve. 3/4 Expansion Valve to Evaporator. Suction. Valve to Evaperator. 15.54MM ID.
3/8. 3/4 inch, Red. Evaporator Side 10mm. 1/2 Evaporator to H-Valve. Up to 02/29/12. 1/2 Expansion Valve to Evaporator. Liquid. Valve to Evaperator. 10.25MM ID.
Expansion Valve. Evaporator Line Alignment Plate. Evaporator Line Alignment Tool.
Power Steering Hose To Reservoir and Pump. 26 mm Diameter. [Open DIameter = M26.0 THK=1.30]. Oil Cooler To Water Inlet. Return Hose to Pump.
M8x1.25x20. Pressure Line to Engine Block. Battery Negative to Auto Transmission. Heat shield attacjing. Heat shield attaching lower. Engine Ground Strap at Head. Ground strap attaching. Ground strap to head. Hinge Pillar to Support.
Hex Head Screw And Washer
M6x1x16. Throttle Control Bracket Attaching. Aluminum Plenum. Filler Tube to Transmission. Cable Bracket to Throttle Body. Throttle Cable Bracket Attach. Bracket Mounting. Throttle Cable to Bellcrank.